Comparison between the oblique and vertical interradicular placement of the mini-screw in the buccal alveolar bone between the maxillary second premolar and first molar using CAD technology

Volume 9, Issue 4, August 2024     |     PP. 116-129      |     PDF (429 K)    |     Pub. Date: September 10, 2024
DOI: 10.54647/cm321289    23 Downloads     1742 Views  

Author(s)

Wenyong Liang, Private practice in Toronto and is a member of Ontario Dental Association, Canada
Qian Cheng, Private practice at 425 Locust St. Suite 200, Burlington, ON, Canada L7S 1T8
Shuran Liang, Private practice at 9-478 Dundas St W, Oakville ON Canada L6H6Y3

Abstract
Introduction: The purpose of the study was to compare the oblique with the vertical buccal interradicular placement of the mini-screw between the maxillary second premolar and first molar in terms of the safety of placement and the potential maximum distalization of the maxillary dentition.
Materials and methods: Using 22-patient maxillary cone beam computed tomography (CBCT) scans and computer-aided design (CAD) technology, a virtual screw was inserted into the buccal process at the angle of 30 degrees (30ᵒ group) or 90 degrees (90ᵒ group) to the long axis of the upper second premolar. The space between the virtual screw and adjacent roots, the length of the virtual screw in the bone and the maximum distalization of the maxillary dentition were measured.
Results: The means of space were around 1.52 mm in the 30ᵒ group and 1.16 mm in the 90ᵒgroup with significant difference (P< 0.001). The means of the maximum distalization were 2.85 mm in the 30ᵒ group and 1.24 mm in the 90ᵒ group with significant difference (P< 0.001). The means of the virtual screw length in the bone were 5.60 mm and 5.77mm in 30ᵒ and 90ᵒ groups respectively without significant difference (P>0.05).
Conclusions: The oblique (30°) placement of mini-screw was much safer and had more potential for distalization of the maxillary dentition compared with the vertical (90°) placement.

Keywords
comparison, oblique, vertical, buccal interradicular, mini-screw placement, CAD

Cite this paper
Wenyong Liang, Qian Cheng, Shuran Liang, Comparison between the oblique and vertical interradicular placement of the mini-screw in the buccal alveolar bone between the maxillary second premolar and first molar using CAD technology , SCIREA Journal of Clinical Medicine. Volume 9, Issue 4, August 2024 | PP. 116-129. 10.54647/cm321289

References

[ 1 ] Park J and Cho HJ. Three-dimensional evaluation of interradicular spaces and cortical bone thickness for the placement and initial stability of microimplants in adults. Am J Orthod Dentofacial Orthop 2009; 136: 314.e1-314.e12
[ 2 ] Fayed MMS, Pazera P and Katsaros C. Optimal sites for orthodontic mini-implant placement assessed by cone beam computed tomography. Angle Orthod. 2010; 80:939–951
[ 3 ] Park HS, Jeong SH and Kwon OW. Factors affecting the clinical success of screw implants used as orthodontic anchorage. Am J Orthod Dentofacial Orthop 2006; 130:18-25
[ 4 ] Yamada K, Kuroda S and Deguchi T et al. Distal movement of maxillary molars using miniscrew anchorage in the buccal interradicular region. Angle Orthod. 2009; 79:78–84
[ 5 ] Lee SK, Abbas NH and Bayome M et al. A comparison of treatment effects of total arch distalization using modified C-palatal plate vs buccal miniscrews. Angle Orthod. 2018; 88:45–51
[ 6 ] Moon CH, Lee DG and Lee HS et al. Factors associated with the success rate of orthodontic miniscrews placed in the upper and lower posterior buccal region. Angle Orthod, 2008; 78: 101-106
[ 7 ] Kravitz ND and Kusnoto B. Risks and complications of orthodontic miniscrews. Am J Orthod Dentofacial Orthop. 2007; 131:00
[ 8 ] Papageorgiou SN, Zogakis IP and Papadopoulos MA. Failure rates and associated risk factors of orthodontic miniscrew implants: A meta-analysis. Am J Orthod Dentofacial Orthop 2012; 142:577-95
[ 9 ] Alharbi F, Almuzian M and Bearn D. Miniscrews failure rate in orthodontics: systematic review and meta-analysis. European Journal of Orthodontics, 2018, 519–530
[ 10 ] Arqub SA, Gandhi V and Mehta S et al. Survival estimates and risk factors for failure of palatal and buccal miniimplants. Angle Orthod. 2021; 91:756–763
[ 11 ] Kuroda S, Yamada K and Deguchi T et al. Root proximity is a major factor for screw failure in orthodontic anchorage. Am J Orthod Dentofacial Orthop 2007; 131:00
[ 12 ] Suzuki M, Deguchi T and Watanabe H et al. Evaluation of optimal length and insertion torque for miniscrews. Am J Orthod Dentofacial Orthop 2013; 144:251-9
[ 13 ] Kim H and Kim TW. Histologic evaluation of root-surface healing after root contact or approximation during placement of mini-implants. Am J Orthod Dentofacial Orthop 2011; 139:752-60
[ 14 ] Shinohara A, Motoyoshi M and Uchida Y et al. Root proximity and inclination of orthodontic mini-implants after placement: Cone-beam computed tomography evaluation. Am J Orthod Dentofacial Orthop 2013; 144:50-6
[ 15 ] Asscherickx K, Vannet BV and Wehrbein H et al. Success rate of miniscrews relative to their position to adjacent roots. European Journal of Orthodontics 30 (2008) 330–335
[ 16 ] Branemark PI, Zarb GA, Albrektsson T. Tissue-integrated Prostheses: Osseointegration in Clinical Dentistry. Chicago: Quintessence, 1985: 199-209
[ 17 ] Prabhu J and Cousley RRJ. Current products and practice bone anchorage devices in orthodontics. Journal of Orthodontics. 2006, 33: 288-307
[ 18 ] Vannet BV, Sabzevar MM, and Wehrbein H et al. Osseointegration of miniscrews: a histomorphometric evaluation. European Journal of Orthodontics 29 (2007) 437–442
[ 19 ] Ohmae M, Saito S, and Morohashi T et al. A clinical and histological evaluation of titanium mini-implants as anchors for orthodontic intrusion in the beagle dog. Am J Orthod Dentofacial Orthop 2001; 119:489-97
[ 20 ] Kim JW, Ahn SJ, and Chang Y et al. Histomorphometric and mechanical analyses of the drill-free screw as orthodontic anchorage. Am J Orthod Dentofacial Orthop 2005; 128:190-4
[ 21 ] Lee YK, Kim JW and Baek SH et al. Root and bone response to the proximity of a mini-Implant under orthodontic loading. Angle Orthod. 2010; 80:452–458
[ 22 ] Oh YH, Park HS and Kwon TG. Treatment effects of microimplant-aided sliding mechanics on distal retraction of posterior teeth. Am J Orthod Dentofacial Orthop 2011; 139:470-81
[ 23 ] Reynders R, Ronchi L and Bipat S. Mini-implants in orthodontics: A systematic review of the literature. Am J Orthod Dentofacial Orthop 2009; 135:564. e1-564.e19
[ 24 ] Moghaddam SF, Mohammadi A and Behroozian A. The effect of sandblasting and acid etching on survival rate of orthodontic miniscrews: a split-mouth randomized controlled trial. Progress in Orthodontics (2021) 22:1-7
[ 25 ] Liang WY. Application of surgical guide for pre-drilling for the successful placement of orthodontic mini-screws using CAD/CAM technology in two cases. J of Orthod 2023; 50(2): 243-51
[ 26 ] Zarb GA, Albrektsson T, Baker G, et al. Osseointegration: on Continuing Synergies in Surgery, Prosthodontics, and Biomaterials. Hanover Park. Quintessence Publishing Co Inc. 2008